Blog

Oct 26, 2024

Metallurgy - Copper Alloy, Zinc Alloy, Brass | Britannica

Our editors will review what you’ve submitted and determine whether to revise the article. Our editors will review what you’ve submitted and determine whether to revise the article. While some zinc

Our editors will review what you’ve submitted and determine whether to revise the article.

Our editors will review what you’ve submitted and determine whether to revise the article.

While some zinc appears in bronzes dating from the Bronze Age, this was almost certainly an accidental inclusion, although it may foreshadow the complex ternary alloys of the early Iron Age, in which substantial amounts of zinc as well as tin may be found. Brass, as an alloy of copper and zinc without tin, did not appear in Egypt until about 30 bce, but after this it was rapidly adopted throughout the Roman world, for example, for currency. It was made by the calamine process, in which zinc carbonate or zinc oxide were added to copper and melted under a charcoal cover in order to produce reducing conditions. The general establishment of a brass industry was one of the important metallurgical contributions made by the Romans.

Bronze, iron, and brass were, then, the metallic materials on which successive peoples built their civilizations and of which they made their implements for both war and peace. In addition, by 500 bce, rich lead-bearing silver mines had opened in Greece. Reaching depths of several hundred metres, these mines were vented by drafts provided by fires lit at the bottom of the shafts. Ores were hand-sorted, crushed, and washed with streams of water to separate valuable minerals from the barren, lighter materials. Because these minerals were principally sulfides, they were roasted to form oxides and were then smelted to recover a lead-silver alloy.

Lead was removed from the silver by cupellation, a process of great antiquity in which the alloy was melted in a shallow porous clay or bone-ash receptacle called a cupel. A stream of air over the molten mass preferentially oxidized the lead. Its oxide was removed partially by skimming the molten surface; the remainder was absorbed into the porous cupel. Silver metal and any gold were retained on the cupel. The lead from the skimmings and discarded cupels was recovered as metal upon heating with charcoal.

Native gold itself often contained quite considerable quantities of silver. These silver-gold alloys, known as electrum, may be separated in a number of ways, but presumably the earliest was by heating in a crucible with common salt. In time and with repetitive treatments, the silver was converted into silver chloride, which passed into the molten slag, leaving a purified gold. Cupellation was also employed to remove from the gold such contaminates as copper, tin, and lead. Gold, silver, and lead were used for artistic and religious purposes, personal adornment, household utensils, and equipment for the chase.

In the thousand years between 500 bce and 500 ce, a vast number of discoveries of significance to the growth of metallurgy were made. The Greek mathematician and inventor Archimedes, for example, demonstrated that the purity of gold could be measured by determining its weight and the quantity of water displaced upon immersion—that is, by determining its density. In the pre-Christian portion of the period, the first important steel production was started in India, using a process already known to ancient Egyptians. Wootz steel, as it was called, was prepared as sponge (porous) iron in a unit not unlike a bloomery. The product was hammered while hot to expel slag, broken up, then sealed with wood chips in clay containers and heated until the pieces of iron absorbed carbon and melted, converting it to steel of homogeneous composition containing 1 to 1.6 percent carbon. The steel pieces could then be heated and forged to bars for later use in fashioning articles, such as the famous Damascus swords made by medieval Arab armourers.

Arsenic, zinc, antimony, and nickel may well have been known from an early date but only in the alloy state. By 100 bce mercury was known and was produced by heating the sulfide mineral cinnabar and condensing the vapours. Its property of amalgamating (mixing or alloying) with various metals was employed for their recovery and refining. Lead was beaten into sheets and pipes, the pipes being used in early water systems. The metal tin was available and Romans had learned to use it to line food containers. Although the Romans made no extraordinary metallurgical discoveries, they were responsible for, in addition to the establishment of the brass industry, contributing toward improved organization and efficient administration in mining.

Beginning about the 6th century, and for the next thousand years, the most meaningful developments in metallurgy centred on iron making. Great Britain, where iron ore was plentiful, was an important iron-making region. Iron weapons, agricultural implements, domestic articles, and even personal adornments were made. Fine-quality cutlery was made near Sheffield. Monasteries were often centres of learning of the arts of metalworking. Monks became well known for their iron making and bell founding, the products made either being utilized in the monasteries, disposed of locally, or sold to merchants for shipment to more distant markets. In 1408 the bishop of Durham established the first water-powered bloomery in Britain, with the power apparently operating the bellows. Once power of this sort became available, it could be applied to a range of operations and enable the hammering of larger blooms.

In Spain, another iron-making region, the Catalan forge had been invented, and its use later spread to other areas. A hearth type of furnace, it was built of stone and was charged with iron ore, flux, and charcoal. The charcoal was kept ignited with air from a bellows blown through a bottom nozzle, or tuyere (see figure). The bloom that slowly collected at the bottom was removed and upon frequent reheating and forging was hammered into useful shapes. By the 14th century the furnace was greatly enlarged in height and capacity.

If the fuel-to-ore ratio in such a furnace was kept high, and if the furnace reached temperatures sufficiently hot for substantial amounts of carbon to be absorbed into the iron, then the melting point of the metal would be lowered and the bloom would melt. This would dissolve even more carbon, producing a liquid cast iron of up to 4 percent carbon and with a relatively low melting temperature of 1,150 °C (2,100 °F). The cast iron would collect in the base of the furnace, which technically would be a blast furnace rather than a bloomery in that the iron would be withdrawn as a liquid rather than a solid lump.

While the Iron Age peoples of Anatolia and Europe on occasion may have accidently made cast iron, which is chemically the same as blast-furnace iron, the Chinese were the first to realize its advantages. Although brittle and lacking the strength, toughness, and workability of steel, it was useful for making cast bowls and other vessels. In fact, the Chinese, whose Iron Age began about 500 bce, appear to have learned to oxidize the carbon from cast iron in order to produce steel or wrought iron indirectly, rather than through the direct method of starting from low-carbon iron.

During the 16th century, metallurgical knowledge was recorded and made available. Two books were especially influential. One, by the Italian Vannoccio Biringuccio, was entitled De la pirotechnia (Eng. trans., The Pirotechnia of Vannoccio Biringuccio, 1943). The other, by the German Georgius Agricola, was entitled De re metallica. Biringuccio was essentially a metalworker, and his book dealt with smelting, refining, and assay methods (methods for determining the metal content of ores) and covered metal casting, molding, core making, and the production of such commodities as cannons and cast-iron cannonballs. His was the first methodical description of foundry practice.

Agricola, on the other hand, was a miner and an extractive metallurgist; his book considered prospecting and surveying in addition to smelting, refining, and assay methods. He also described the processes used for crushing and concentrating the ore and then, in some detail, the methods of assaying to determine whether ores were worth mining and extracting. Some of the metallurgical practices he described are retained in principle today.